2/2/2024 0 Comments Laminating sheetsIf you need to hide some openings, you must change the operation of the offset layer from “Print then Cut” to “Basic Cut” and use the “Contour” tool at the bottom of the layers panel to get rid of the empty spots.Īfter hiding undesirable spots, change the layer’s color to white and the operation back to “Print then Cut.” Also, you may not want any extra cut-outs after you laminate. Move the outline to the side and check for undesirable openings.įor instance, the offset on the circles was glitchy with those cut-outs. Check “Weld Offsets” and slide the distance circle to form a small outline allowing some space between illustrations. Select your flattened project on the canvas and click “Offset” on the top menu. You can also use a PTC project of your own. Let’s start with the following project in Design Space. ![]() The idea behind this project is to make a “Print then Cut” layer for all the illustrations you want to laminate and a ‘Print then Cut” layer for cutting the laminated page using the sensor mark sheet of the first layer.īoth layers must be the exact size for this fantastic tip to work. ![]() Important: this project won’t work if you send your project to cut from the phone app. ![]() This method isn’t compatible with older machines because we’ll be using “Print then Cut” with the laminated sheet, and as you know, these sheets are pretty reflective, and the sensor on older machines can’t read the project. Method 1 – Cutting Laminated Sheets from Desktop
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |